Tabla de contenido
Idiomas disponibles
Idiomas disponibles
specified voltage may cause a serious injury to
the user as well as damage the tool.
IMPORTANT: This appliance is not intended
for use by persons (including children) with re-
duced physical, sensory or mental capabilities
may be different or reduced, or lack of experi-
ence or knowledge, unless such persons are su-
pervised or trained to operate the product by
a person responsible for their safety. Children
should be supervised to ensure they do not use
the devices as toys.
TOOL USE AND CARE
Do not force the power tool. Use the correct
tool for the application. The correct tool will
do the job better and more safely at the rate
that it was designed to work at.
Do not use tools if switch does not turn it on or
off. Any tool that cannot be controlled whith
the switch is dangerous and must be repaired.
Disconnect the plug from the power source
before making any adjustments, changing ac-
cessories or storing the tool. This preventive
safety measures reduce the risk of accidental
starting of the tool.
When the power tool is not in use, store it out
of the reach of children, and do not allow in-
dividuals who are not familiar with the power
tool or these instructions to operate it. Power
tools are dangerous in the hands on untrained
users.
Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken parts,
and any other condition that may affect the
operation of the power tool. If it is damaged,
have it repaired before using. Many accidents
are caused by poorly maintained power tools.
Check for misalignment or bonding of moving
parts, breakage parts, and any other condition
that may affect the tools operation. If you find
a damaged tool, take it to service before use it.
Use only accessories that are recommended by
the manufacturer of your model. Suitable ac-
cessories for one tool, may become hazardous
when are used on another tool.
Keep cutting tools, sharpened and clean. Cut-
ting tools in good condition with sharpened
edges, are less likely to stuck in workpieces or
easier to control.
E N G L I S H •
Is recommendable to use a safety device suit-
able, such a thermal and diferential switch
when you are using an electric equipment.
SERVICE
Tool service must be perfomed only by quali-
fied repair personnel. Service or maintenance
performed by unqualified personnel could re-
sult in a risk of injury.
SPECIFIC SAFETY RULES FOR
HEAT GUNS
• Before connecting the unit to the mains, en-
sure the unit is switched OFF as it will achieve
maximum heat in just 60 seconds.
• This unit reaches 650˚ C, always wear protec-
tive gloves and eyewear.
• Always allow to cool before storing and nev-
er touch the heat deflector.
• Never attempt to use the unit to dry animals,
clothing or hair.
• Never use this appliance as a hair dryer.
• Always use in ventilated areas.
• Heat may be transferred to combustible ma-
terials out of eyesight.
• When using this appliance in an area where
there may be combustible materials or gases,
extreme caution must be taken to prevent fire
or explosion. Do not apply to the same place
for a long time.
• Do not apply the heat nozzle to an area for
excessive periods of time.
• A fire may arise if the heat gun is not used
with care.
• Do not use in presence of an explosive atmo-
sphere.
• Do not leave the heat gun unattended when
in use.
• If the supply cord is damaged, it must be re-
placed by a special assembly available from a
service agent.
• Always use the appropriate safety equipment
that is required for the product.
DO NOT BLOCK THE VENT AT THE REAR OF THE
UNIT
WARNING: During application the heat noz-
zle must be kept at least above 5 cm away from
the workpiece. This is to allow air flow.
Do not touch the nozzle or the scraper blade
when working, these become extremely hot
and will cause severe burns. Wear gloves to
protect hands from hot scrapings.
U s e r's m a nu al
9
Tabla de contenido
