Urmet 1083 Manual De Configuración página 23

5. Press the "Scan" button to launch the QR-Code
reader application on your smartphone. If no
applications are present, open the Apple Store (iOS)
or Play Store (Android) to download a recommended
app.
6. After scanning the QR-Code, activate the WiFi
on your smartphone and access the "CALLFW"
WiFi network created by your device.
Wi-Fi network devices
7. Select the type
to be set up on the device.
The connection to your home LAN can be achieved
via wire or by hooking up to your home Wi-Fi.
Choose which type of connection you wish to use -
either "Wire" or Wi-Fi ("Wireless").
Choose the connection type
DS1083-122A
of Internet connection
If you choose the wired connection, you will go
directly to the IP address configuration step.
If you choose to connect via Wi-Fi, the following
screen will appear:
Connection via Wi-Fi
It is essential to select from the dropdown menu the
(condominium) network to connect to.
Tick "Advanced" only for access to special
settings, e.g. access to hidden networks.
8. After you have selected it, press "OK" to confirm.
In the next screen enter the network Password and
press "Continue" With the wireless configuration
it is optionally possible to identify up to two time
intervals during which the Wi-Fi will be automatically
switched off daily (e.g. nightly from 11:00 P.M. until
7:00 A.M.): during these intervals, the LED on the Call
Forwarding Device will be lit (steady orange light).
Wi-Fi Switch-off Intervals
23