Idiomas disponibles
Idiomas disponibles
Up to 6 stations can be preset in AM, FM1, FM2, and FM3
respectively.
Preset stations can be simply called up by pressing [}]
(P·SET) or [{] (P·SET).
Notes:
¡
Direct selection can be executed with [1] to [6] but-
tons on remote control.
¡
You can switch between 6 and 18 for FM presetting
stations. (EACH BAND/ALL BAND)
¡
Preset stations are changeable. (Preset Swap)
Auto Preset Memory (APM)
Stations with good receiving conditions automatically
preset.
1
Select a band.
2
Hold down
[BAND] (APM)
for 2 sec. or
more.
The preset stations under best receiving conditions
are received for 5 sec. each after presetting the sta-
tions (SCAN). To stop scanning, press [}] or [{].
Note: New stations overwrite existing saved stations.
1
Press [MENU] to display the menu dis-
play.
For using the remote
control, hold down
[SEL](MENU) for 2
sec. or more.
2
Press [
}
] or [
{
] to select a mode to be
adjusted.
3
Press [BAND]
(SET) to adjust.
Manual station preset
1
Tune in to a station.
2
Hold down
more.
3
Select a preset number by pressing
or
[{]
Note:If [BAND] is pressed while receiving an FM
station, FM broadcasting is changeable among FM 1
to FM 3.
4
Hold down [BAND] (SET) for 2 sec. or
more to determine the selection.
Notes:
In step 2, a station can be registered by holding down
¡
the numeric button [1] to [6] for 2 sec. or more.
¡
To stop presetting stations, press
¡
The operation above allows users to replace the cur-
rent station with the station preset in the selected
number while selecting a preset station.
4
Press [MENU] to confirm the adjust-
ment.
For using the remote control, hold down [SEL]
(MENU) for 2 sec. or more.
PRESET
Preset range for FM bands
CQ-C7403U/C7303U/C7203U/C7103U
or
for 2 sec. or
[}]
[{]
.
[DISP]
: Individual setting for FM1-3 each
(default)
: Setting of FM1-3 together
[}]
(Display).
21
