Idiomas disponibles
Idiomas disponibles
Booster Mode
Select this mode to quickly clean the air and
circulate it as far as possible.
Press the Mode button to choose the Booster
mode.
NOTE
• If you happen to unplug the power cord from
the outlet before the clean booster closes
completely, plug in the cord again. The clean
booster will swing left and right and then close
completely.
Rotating the Clean Booster
While in Booster mode, press the Swing button.
Normal Mode
Select this mode for basic air purification and
control over the fan speed.
Press the Mode button to choose the Normal
mode.
Adjusting Fan Speeds
Air Purifier Fan Speed
Press the Speed button during operation to adjust
the fan speed on the air purifier.
• Each time you press the button, the speed
changes in the following order:
Auto ~ Low ~ Middle ~ High ~ Turbo.
Fan Speed Display
The fan speed is displayed on the status display
panel. As you adjust the fan speed, the display
increases or decreases by 2 bars at a time.
[ Fan speed set to Middle ]
NOTE
• When the appliance is first turned on, the fan
speed is set to Auto. Auto mode adjusts the fan
speed automatically based on the indoor air
quality.
EN
19
