Technical Data; Designation Of Parts - Makita EW1050H Manual De Instrucciones

TECHNICAL DATA

Weight
Dimension
Type
Diameters (suction-discharge)
Total head
Maximum delivery volume
Maximum suction lift
Volume (fuel tank)
Volume (oil tank)
Engine displacement
Maximum engine performance
Carburetor
Ignition system
Spark plug
Electrode gap
Fuel
Engine Oil
Applicable water temperature
EW1050HG, EW1060HG: This model adapts for use with Brazilian gasoline (E20 and E25).
(For Canada) NOTE: This spark ignition system complies with the Canadian standard ICES-002.
50
45
40
35
30
Total
25
head (m)
20
15
10
5
0
0 20
Maximum delivery volume (L/min)
kg (lbs)
mm (inch)
inch
m (ft)
L/min (gal/min)
m (ft)
L
L
3
cm
kW
type
type
type
mm
°C (°F)
EW1050H, EW1050HG
EW1060H, EW1060HG
40 60 80 100 120
EW1050H/EW1050HG
5.8 (12.8)
327 x 231 x 319
(12-7/8" x 9-1/8" x 12-1/2")
Self-priming CENTRIFUGAL PUMP
35 (115)
110 (29)
8 (26)
0.5
0.08
24.5
0.71 at 7,000 r/min
SAE 10W-30 oil of API Classification, Class SF or
higher (4-stroke engine for automobile)
5 – 40 (41 – 104)

DESIGNATION OF PARTS

(Fig. 1 & 2)
ASSEMBLY (Fig. 3)
WARNING:
• Before doing any work on the equipment, always stop
the engine.
• Start the engine only after having assembled the equip-
ment completely.
HOSE INSTALLATION
1. Install the hose joints on the pump.
CAUTION:
• When installing the joint to the pump, be sure the pack-
ing is in place.
140
2. Connect the hoses on the joints with band.
Check the hose band is securely tightened.
3. Connect the strainer on the inlet hose end.
NOTE:
• If air leaks, water could not be drawn up.
CAUTION:
• Do not remove strainer or pump damage may occur by
foreign material.
Check the hose band is securely tightened.
EW1060H/EW1060HG
7.3 (16.1)
356 x 234 x 336
(14" x 9-1/4" x 13-1/4")
1
45 (148)
130 (34)
8 (26)
0.65
0.1
33.5
1.07 at 7,000 r/min
Diaphragm
Solid state ignition
NGK CMR6A
0.7 – 0.8
Automobile gasoline
5 – 40 (41 – 104)
7