Idiomas disponibles
Idiomas disponibles
CAPACITY CHART
All-purpose flour
Cookies/Biscuits
Mashed Potatoes
PRODUCT ASSEMBLY
1.
Turn the Stand Mixer to "0" (OFF) and then unplug.
2.
Place Bowl-Lift Lever in down position.
3.
To attach the Bowl: Fit the Bowl Supports over Locating Pins and press down on back of
the Bowl until Bowl Pin snaps into spring latch.
IMPORTANT: If the Bowl is not securely snapped into place, it will be unstable and wobble
during use.
4.
To attach the accessory: Slip the accessory on the shaft and press upward as far as
possible. Turn accessory clockwise, hooking it over the pin on the shaft.
5.
To raise the Bowl: Rotate the Bowl-Lift Lever to the straight up position. The Bowl must
always be in the raised position when mixing.
PRODUCT USAGE
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
1.
Plug it into an earthed outlet. Start with lower speed to avoid splashing and increase it
gradually. Refer to the "Speed Control Guide".
2.
Test the Beater to Bowl Clearance: Plug the Stand Mixer into an earthed outlet. Turn
Stand Mixer ON and test each speed, making sure the beater does not touch the Bowl
during operation. If the beater is too far away from the bottom or is hitting the Bowl,
proceed to next step to make adjustments.
Bread
Electrical Shock Hazard
6.9 L BOWL
WARNING
2 to 2.2 kg
8 breads of 450 g
160 pieces
3.5 kg
5
