Technical Assistance - Warranty; Guarantee Conditions - Extel Entry 7 Instrucciones De Uso E Instalación

9. TECHNICAL ASSISTANCE - WARRANTY

Fault
• The monitor does not
light up
• Bad image and/or bad
sound
• Image is too bright
• Black screen, no
ring tone
• No sound from the
roadside panel
The latest version of the instructions in colour is downloadable from:

GUARANTEE CONDITIONS :

The guarantee does not cover: the consumables (batteries, etc.) and the damages caused by: misuse, improper
installation, external intervention, deterioration by mechanical or electrical shock, fall or atmospheric phenomenon.
• Never open the apparatus or the guarantee will be invalidated.
• For return in SAV, protect the screen to prevent scratching.
• Only ever clean with a soft cloth; never use solvents. Before cleaning, disconnect and switch off the system.
Caution :
Do not use any acid or alcohol based or other similar cleaning product or solvent. You may
damage the appliance and the vapours are explosive and dangerous for your health.
Do not use any tool which can be voltage conductor (metallic brush, sharp tool...or other) for cleaning.
The sales slip or the invoice is required as proof of purchase date.
GB5
Cause
• The monitor is not con-
nected to a power source
• Environment
• Camera position
• Installation
• Insects
If required, our technical site is at your disposal:
This device is guaranteed for labour and parts in our premises.
CFI EXTEL - ENTRY 7 - 05/2017 - V1
Solution
• Check that the adaptor plug is correctly
plugged in.
• Check that the wires used are the correct
size and that the connection wires for the vide-
ophone are not in the same sheath as the 230V.
• Do not expose the lens of the camera direct-
ly to sunlight or to a reflective surface.
• Wires not properly connected
• Check the positions on the terminal block
• Check that the hole for the microphone on
the roadside panel
is not blocked
www.cfi-extel.com
www.cfi-extel.com