Idiomas disponibles
Idiomas disponibles
•
Door seal protection: Ensure you open the door completely before removing shelves
from their rails.
•
Do not slide multiple loaded shelves outwards as it may cause bottles to fall or may
cause the wine cooler to tip forward.
•
Do not cover shelves with material like aluminum foil or metal plate as this will impact
internal airflow.
•
Do not move your wine cooler while it is loaded with bottles. This could distort the walls
of the wine cooler and cause back injuries.
D. FUNCTIONS AND TEMPERATURE SETTING
Please note that depending on the selected settings and the loading, it can take 24 hours
for the wine cooler to reach the desired temperature.
•
Plug the power cord into a suitable power supply.
•
Set the thermostat to adjust the temperature using the below keys.
LIGHT
K1: This button allows you to turn on / off the inside light.
INCREASE TEMPERATURE
K2: Press the button once, the LED display will flash indicating the current temperature.
Press again to set the temperature. 1 touch will increase the temperature by 1 degree. The
blink stops after 5 seconds without action on your part, and the new temperature requested
is recorded. The LED display then shows the actual temperature inside.
TEMPERATURE DISPLAY
Li: The temperature can be adjusted from 5 to 20 degrees depending on the cycle below.
74
