Idiomas disponibles
Idiomas disponibles
9. Place the top hinge on the opposite side.
10. Place the door on the wine cooler, then loosely screw the hinge without
tightening completely.
11. Once the door is installed, adjust the hinge by tightening the screws
until the door is in the correct place.
12. Replace the top hinge cover.
NOTE: The door seal may come out of its place when changing the door. If you notice gaps
between the seal and the wine cooler frame when the door is closed, pull carefully on the
seal to close these openings. The correct positioning of the seal is important to ensure the
wine cooler is waterproof.
BEFORE USE
Wait 24 hours before starting your wine cooler.
We recommend that you leave your wine cooler upright, clean it with soapy water and leave
it open to eliminate residual odors.
RECOMMENDATIONS:
•
Place the wine cooler in a cool place away from sunlight and heat sources.
•
Certain parameters such as room temperature, door opening time or the number of
bottles stored inside could affect the internal temperature of your wine cooler. We
recommend that you check the internal temperature regularly and adjust it if
necessary.
•
Do not cover the vents.
OPERATING NOISE:
To reach the desired temperature, this wine cooler, like all wine coolers with compressor
cooling systems, can produce certain noises, which are normal operating noises.
•
Gurgling noise: caused by the refrigerant gas circulating in the refrigeration area of
the unit.
•
Cracking noise: resulting from the contraction and expansion of the gas to produce
the cold.
The perception of noise by the individual is directly related to the environment in which
the wine cooler is located. Noise in normal operation is not a cause of the warranty's
application.
70
