Idiomas disponibles
Idiomas disponibles
INSTALLATION
RECOMMENDATIONS:
The location you have selected for your wine cooler should:
• be well ventilated;
• be away from any source of heat and direct sunlight;
• not be frequently wet (e.g. laundry, bathroom);
• have a level floor;
• have a reliable electricity supply; and be away from the microwave. Some
microwaves do not have a wave jamming shield so when the wine cooler is placed
less than 1m from a microwave, the operation of the wine cooler can be affected.
The device is designed for the N-ST climate class. Protect the device from heat (above 38
˚C) and cold (below 16 ˚C), dust, moisture, flooding events and splashes.
•
The wine cooler must be positioned so that the power socket remains accessible after
installation.
•
Unwind the power cord but do not plug it into the electricity supply immediately.
•
Install your wine cooler in its final location before loading it. If the wine cooler is moved
while loaded, the wine cooler walls may be permanently deformed.
IMPORTANT: Two people are required to properly and safely install the wine cooler.
A. LOCATION
To ensure adequate ventilation of the wine cooler, allow a minimum of 15 cm between the
wine cooler and the nearby walls as shown in the illustration below.
67
