Idiomas disponibles
Idiomas disponibles
3.5 Process digital inputs (connector CN3)
CN3-8
Wire 9
CN3-16
Wire 8
CN3-15
Wire 7
CN3-14
Wire 6
CN3-13
Wire 5
CN3-12
Wire 4
CN3-11
Wire 3
CN3-10
Wire 2
CN3-9
Wire 1
The various combinations of these digital inputs enable the following:
- selection of the required welding process
- selection of synergy
- selection and retrieval of the welding spots saved with RC300.
- selection of the process control (RC300 or robot)
As agreed:
0V = 0
input opened or not connected (low state)
24V = 1 Input closed or powered (high state)
FP-RC configuration: the selection of the welding process (MIG Short Spray Arc manual or synergetic, Pulsed MIG, TIG...), of the
synergy used and of any retrieval of the welding spots are performed by FP-RC.
CN11-1
CN3-8
0
0
If these digital inputs are not connected, the FP-RC configuration does not change.
MIG SHORT SPRAY ARC manual configuration: the selection of welding process MIG SHORT SPRAY ARC manual is directly
defined by this combination of digital inputs.
CN11-1
CN3-8
1
1
TIG configuration: the selection of the TIG welding process is directly defined by this combination of digital inputs.
CN11-1
CN3-8
1
1
Setting input
Setting input
Coding input
Coding input
Coding input
Coding input
Coding input
Coding input
Coding input
CN3-16
CN3-15
CN3-14
0
0
CN3-16
CN3-15
CN3-14
0
0
CN3-16
CN3-15
CN3-14
1
0
TIG DC
TIG AC
TIG DC-
TIG DC+
Constant current TIG
Pulsed current TIG
Fast Pulse TIG/AC/DC MIX
CN9-6/7/13/14
CN3-8 (9)
CN3-16 (8)
CN3-15 (7)
CN3-14 (6)
CN3-13 (5)
CN3-12 (4)
CN3-11 (3)
CN3-10 (2)
CN3-9 (1)
CN3-13
CN3-12
0
0
0
CN3-13
CN3-12
0
0
0
CN3-13
CN3-12
0
0
0
CN3-12
CN3-12
CN3-12
0
0
1
CN3-11
CN3-10
CN3-9
0
0
CN3-11
CN3-10
CN3-9
0
0
CN3-11
CN3-10
CN3-9
0
0
CN3-11
CN3-10
CN3-9
CN3-11
CN3-10
CN3-9
0
1
CN3-11
CN3-10
CN3-9
0
1
0
0
0
0
0
1
23
