FLORABEST FARAT 40-Li A1 Instrucciones De Funcionamiento página 34

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 89
Repair
Q
This product does not contain any parts that can
be repaired by the user. Contact an authorised
service centre or a similarly qualified person to
have it checked and repaired.
Storage
Q
Switch the product off and remove the battery
o
pack
.
27
Clean the product as described (see
o
"Cleaning").
Store the product and its accessories in a
o
dark, dry, frost-free, well-ventilated place.
Always store the product in a place that is
o
inaccessible to children. The ideal storage
temperature is between 10 °C and 30 °C.
Fold up the plant protector
o
We recommend using the original package
o
for storage or covering the product with a
suitable cloth or enclosure to protect it against
dust.
Regularly check the charge level of the
o
battery pack, if it is to be stored for an
extended period. Optimum storage conditions
are cool and dry.
Transportation
Q
Switch the product off and remove the battery
o
pack
.
27
Attach a proper knife protector (not included)
o
and fold up the plant protector
Attach transportation guards, if applicable.
o
Always carry the product by its handles.
o
Protect the product from any heavy impact
o
or strong vibrations which may occur during
transportation in vehicles.
Store the spare trimming spool in the storage
o
compartment
.
2
Secure the product to prevent it from slipping
o
or falling over.
Troubleshooting
Q
WARNING!
Only perform the steps described within
u
these instructions! All further inspection,
maintenance and repair work must be
performed by an authorised service centre or
a similarly qualified specialist if you cannot
solve the problem yourself!
36 GB / IE
Suspected malfunctions are often due to causes
that the users can fix themselves. Therefore check
the product using this section. In most cases the
problem can be solved quickly.
Problem Possible
Product
does not
start
.
15
Product
does not
reach full
power
Unsatisfac-
tory result
.
15
Product
suddenly
stops
Excessive
vibration
or noise
Solution
cause
Attach properly
Battery pack
27
not properly
attached
Remove and charge
Battery pack
27
the battery pack
discharged
Check by a
Battery pack
27
specialist electrician
damaged
Other electrical
Check by a
defect to the
specialist electrician
product
Remove and charge
Battery pack
27
the battery pack
capacity too low
Air vents are
Clean the air vents
blocked
Accessory is
Replace with a new
worn
one
Accessory
Use suitable
not suitable
accessory
for intended
operation
Product
Remove the product
overloaded
from the working
surface and switch it
on again
Remove and charge
Battery pack
27
the battery pack
discharged
Remove the battery
Battery pack
27
pack
too hot
cool down
Accessory is
Replace with a new
dull / damaged
one
Bolts / nuts are
Tighten bolts / nuts
loose
27
27
27
and let it
27
loading