Idiomas disponibles
Idiomas disponibles
Final Adjustments
STEP 1
When the gate is in the closed and latched position there should be no larger
than a 2 1/2" gap from the wall to the first picket on either side. To achieve this
either screw inward or outward the hinge adjustment knobs and/or the receiver
adjuster knobs.
2 1/2" MAX
STEP 2
Once the 2 1/2" maximum gap is set, tighten down the 4 jam nuts with a
13mm wrench. One on each hinge adjustment knob and one on each receiver
adjuster knob.
2 1/2" MAX
2 1/2" MAX
English
11
