EMERYMARK EMP 200 Manual De Operación página 54

Operation Manual EMP
With the first mold inside the vat, start filling the next with product and insert it into the vat.
Repeat the process until you fill the vat completely with molds.
YOU SHOULD NOT PLACE ALL MOLDS AT THE SAME TIME AS THE TEMPERATURE OF THE
MACHINE WOULD NOT BE PROPER AND WOULD TAKE A LONGER TIME TO FREEZE THE
PRODUCT.
5. When molds are ready, please take out one
at a time.
7. Pull out the lid of the mold.
54
6. Use mold remover, put the mold inside
(3 seconds).
www.emerymark.com