Idiomas disponibles
Idiomas disponibles
It is important that the electrical installations are carried out by a qualified professional, as it
should calculate the power cable and meets the requirements of the equipment (size and ca-
pacity). The machine is equipped with heavy-duty cable.
NOTICE:
!
If you have a three phase delta system, connect higher voltage (wild wire) into L2 (red
cable).
NOTE: This machinery requires three-phase, four wire connections (three lines of voltage and
one ground), and the single-phase three-wire connection required (two lines of voltage and
ground).
1.2.2 Water connections
Water connections are located on one side of the machine.
The connections should be previously instaled were the machine will be placed. Water -in- and
water -out- connections will need a hose of ¾" for each.
Cold
water
coupling according to model
Hot
water
1
Water
2
valve
Water connections
Cable
outlet
Coupling
Ni
Installation
Water in (cold water)
1
Water out (hot water)
2
MODEL
COUPLING SIZE
EMP 200
EMP 500
EMP 1500
EMP 3000
3/4
3/4
1
1 1/2
43
