Idiomas disponibles
Idiomas disponibles
Operation Manual EMP
1.2.1 Electrical requirements
!
WARNING:
Make sure that the plug has not been installed in the power supply.
The EMP500, EMP1500 and EMP3000 models require a three-phase connection at 220 Volts.
The EMP200 model requires a single-phase or three-phase connection at 220 Volts, according
to your preference.
In order to connect the machines to the power supply, you need to install the corresponding
plug according to your equipment:
SINGLE-PHASE
L1
L3
BLACK
BLUE
MODEL
SINGLE-PHASE
EMP-200
L6-30
EM-500
---
EMP-1500
---
EMP-3000
---
* Please consult your distributor in the US and Canada
!
WARNING:
Use copper conductors only.
42
GROUND
L1
GREEN
BLACK
TYPE OF PLUG
*DIRECT CONNECTION TO DISCONNECTOR BOX OR LOAD CENTER
WITH 80 AMPS THERMAL PROTECTION OR 80 TO 100 AMPS
INDUSTRIAL PLUG, 240VAC, 4 WIRE, 3 PHASE PLUS EARTH
*DIRECT CONNECTION TO DISCONNECTING BOX OR LOAD
CENTER WITH INDEPENDENT THERMAL PROTECTION OF 150 AMPS
OR INDUSTRIAL PLUG OF 150 AMPS WITH THERMAL
PROTECTION OF 150 AMPS, 4 WIRE, 3 PHASES PLUS EARTH
THREE PHASE
L2
L3
RED
BLUE
THREE PHASE
*L15-30
*L15-30
www.emerymark.com
GROUND
GREEN
