Idiomas disponibles
Idiomas disponibles
CLEANING AND MAINTENANCE (CONTINUED)
End of Season Storage and Maintenance:
If the appliance will not be used for a long time, follow these steps:
1.
Be sure to drain the left-over water condensation. Remove BOTH upper and bottom
drain plugs and use a drain pan to collect the water (make sure to replace the
Drain plug Caps when finished).
2.
To dry excess moisture, run the unit in Fan only mode for 30 minutes before storing.
3.
Turn off and unplug the Portable Air Conditioner from the power supply.
4.
Remove the dust filter and clean with water. Dry the dust filter and then reinstall.
•
Remove the Hose from the unit by rotating anti-clockwise then pulling away.
•
Remove the Window Bracket, Window Bracket Panel Adapter and Hose Connector.
•
It is recommended to store the Window Kit parts in a bag together with the Remote Control,
Drain Tube and placing them together with the Portable Air Conditioner unit.
•
If needed, you can clean the Window Kit with a damp cloth and water before storing.
Make sure all parts of the Window Kit are dry before storage.
6.
Cover the Portable Air Conditioner with a cloth/ plastic bag before storage, to protect from dust
and scratches collecting on the surface of the unit.
7.
It is recommended to coil the power cord before storing to ensure the cord is protected from
bents and creases.
8.
Store the Portable Air Conditioner in a cool, dry place, away from direct sunlight.
EN
12
