Kärcher BR 35/12 C Bp Manual De Instrucciones página 22

Fault
Insufficient cleaning result
Brush does not turn
The appliance can be equipped with vari-
ous accessories depending on the cleaning
Description
Brush roller, white (soft)
Brush roller, red (medium,
standard)
Brush roller, green (hard)
Brush roller, black (very
hard)
Brush roller, orange (high/
low)
Microfibre roller
Pad roller shaft
Roller pad, red (medium)
Roller pad, green (hard)
Roller pad, yellow (soft)
Fill hose
Suction lip kit
22
Remedy
Check/set the brush contact pressure.
Check the brush type and the detergent for their suitability.
Check the brushes for wear, replace if required.
Pull the safety switch towards the steering wheel.
Check if foreign matters are blocking the brush roller; re-
move foreign matter if required.
Switch off the switch for the brush drive, wait for a short pe-
riod of time, switch the switch back on.
Accessories
task. Please request our catalogue or visit
us on the Internet at www.kaercher.com.
Part no.: Description
4.037-036.0 For polishing floors.
4.037-031.0 For cleaning slightly dirtied or sensitive floors.
4.037-038.0 For cleaning heavily dirtied floors.
4.037-039.0 For cleaning heavily dirtied floors.
4.037-037.0 For scrubbing structured floors (safety tiles,
etc.).
4.037-040.0 Cleaning brush made of microfibres with espe-
cially high cleaning performance, especially for
fine stone tiles.
4.762-009.0 For intake of roller pads.
6.369-047.0 For cleaning slightly dirtied floors.
6.369-052.0 For cleaning normal to heavily dirtied floors.
6.369-053.0 For polishing floors.
6.680-124.0 For filling the fresh water tank
4.037-035.0 As replacement
– 9
EN