Scheduled Recording - PNI HOUSE IP516 Manual De Usuario

5.1 Record config
Access Main menu - Record - Record config
Set the recording parameters on each channel or all channels simultaneously. The system is set
to start recording 24 hours continuously.
Note: The HDD must be set to read / write mode.
Channel:
Choose the number corresponding to the channel for which you want to set the
recording. Choose All to make settings for all channels at the same time.
Redundancy:
The function is not active for this model.
Length:
Set the length of each recording file (in minutes). By default it is 60 min
Pre-Record:
Record between 1 and 30 seconds before an alarm event.
Mode:
set the recording type: scheduled, manually or stopped.

Scheduled recording:

•
3 modes (normal recording, motion detection and alarm):
Regular: the device records within the set time range. Video file type is "R".
Detect: the device records the motion detection. The video file type is "M".
Alarm: the alarm recording function includes: motion detection, image loss,
video loss.
You can choose 4 recording periods (between 0:00 and 24:00) and
17
EN