Zzipp ZZONE2120PA Manual De Usuario página 8

Idiomas disponibles

Idiomas disponibles

BLUETOOTH
In order to play back audio from a smartphone, tablet or other Bluetooth device, the built-in
Bluetooth receiver will need to be paired with a device which is within range."
To pair a device with the ZZONE2120PA Bluetooth receiver, it is necessary to scan for devices
in the Bluetooth menu of the sending device and select to pair with "BT66078". Once paired,
the ZZONE2120PA display will show it is connect, Password: 1234
Select to connect as an audio device and play audio tracks on the smartphone or tablet (or
other) and the audio should be heard on the selected zone. The buttons labelled "Prev" and
"Next" can adjust the audio player output volume. Press and hold "Prev" to increase volume
or press and hold "Next" to decrease volume. If the sending device goes out of range or the
Mode of the audio player is changed, the connection will stop. Returning to within range or
to Bluetooth mode will restore the pairing. It may be necessary to re-select connection as
an audio device on the sending device.
FM TUNER
Press the Mode button to switch to the FM tuner function. For good FM reception, it will be
necessary to connect an external aerial to the Antenna connector on the rear panel using
good quality coaxial RF cable terminated. If no channels are tuned in, press the Play button
to begin auto tuning, which scans available stations and stores them as channels within
the ZZONE2120PA FM tuner. To step through pre-set stations, press the Previous or Next
buttons.
USB / SD PLAYER
The ZZONE2120PA audio player has inputs for a USB pen drive or SD card with standard
compressed digital audio files on them. Inserting either or both of these will switch the
player to read from these sources and the display will show "MP3 Mode". After you Insert
the USB it will play automatically, you can use "Prev" or "NEXT" to choose last or next song,
"REPT" is for one song or all song repeat.
2 ZONE REMOTE PAGING MICROPHONE ZZONE6000MC (OPTION)
• Communication through CAT6 cable up to 200M
• Direct power supply from matrix controller
• 2speaker zone individual group or all zone paging
• Up to 8 Mics working simultaneously loop connection
8
loading