Mitsubishi Electric PAA-A18AA1 Manual De Operación página 14

5.4. Auto restart function
Indoor controller board
This model is equipped with the Auto Restart Function.
When the indoor unit is controlled with the remote controller, the operation mode, set temperature and the
fan speed are being memorized by the indoor controller board. The Auto Restart Function enables the PAA
unit to restart from the last memorized operating parameters (operation mode, set temperature and the fan
speed) always.
The Auto Restart Function can be set by using the remote controller (Mode no. 01) as follows.
Mode Mode
No.
Automatic
01 recovery after
power failure
Specifications are subject to change without notice.
PAA-A18, 24, 30, 36, 42AA1/BA1/CA1
Settings
Disable
Enable (four
minutes of standby
time is required
after the restoration
of power)
14
Setting Unit Numbers
No.
1
Set "Grp." for the unit 2
number. These settings apply
to all the connected indoor
units.
© 2022 Mitsubishi Electric US, Inc.