Idiomas disponibles
Idiomas disponibles
Safety information
➜
Do not process substances that could release energy in an uncontrolled manner
(e.g. self-ignition).
➜
Do not process substances in which the energy input through mixing poses a
danger.
➜
Do not work with an open flame in the immediate vicinity of the device (risk of
explosion).
➜
Wipe off any fluid that may have spilled on the device immediately.
➜
Always switch off the device when it is not in use.
Assembly
CAUTION
Risk Of Slipping!
The vibration during operation can cause the device to move over
the mounting surface and/or fall to the ground.
➜
Operation
CAUTION
Risk of injury, risk of damage to property due to tilting/fall-
ing of the device
High shaking frequencies in combination with a large load and/or
a tall attachment assembly on the shaking platform may cause the
device to swing up and fall!
➜
➜
An uneven distribution of the load on the shaking platform may
cause the device to swing up and fall!
➜
➜
Risk of injury, risk of damage to property from falling ves-
sels
At high shaking frequencies, there is a risk that improperly fastened
vessels will fall off the shaking platform.
➜
➜
Observe the instructions for the correct positioning of the
device!
Only gradually increase the shaking frequency to the required
level under the above conditions, paying attention to the
stability of the structure.
Lower the shaking frequency or reduce the total load on
the shaking platform when the device starts to move during
operation.
Always ensure that the vessels are evenly distributed on the
shaking platform.
Pay particular attention to an even distribution of the weight
load when vessels of different sizes and/or differently filled
vessels are placed on the shaking platform at the same time!
Before switching on the device, make sure that all vessels are
properly fixed on the shaking platform.
Contaminated surfaces should be cleaned immediately.
13
