Troy-Bilt 030237 Instrucciones De Uso página 4

Ocultar thumbs Ver también para 030237:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Section 1: Safety RuJes
WARNING
WHEN
ADJUSTmNG
OR MAKmNG
REPAmRS TOYOUR
GENERATOR
Disconnect
the spark plug wire from the spark plug and place
the wire where it cannot contact
spark pIug
WHENTESTmNG
FOR ENGINE
SPARK
Use approved spark plug tester:
DO NOT check for spark with spark plug removed,
WARNING
DO NOT touch hot surfaces.
Allow equipment
to cod
before touching.
The generator
must be at least 5 feet from structures
having
combustible
walls and/or other combustible
materials.
Keep at least 3 feet of clearance
on all sides of generator
for
adequate
cooling, maintenance
and servicing.
In the State of California
a spark
arrester
is required
by law
(Section
4442 of the California
Public Resources
Code),
Other
states
may have similar law,s. Federal
laws apply on federal
lands. [f you equip the muffler with a spark arresterl
[t must be
maintained
in effective
working
order:
CAUTION
DO NOT tamper
with governed
speed.
Generator
supplies
correct
rated frequency
and voltage
when
running at governed
speed.
DO NOT
modify generator
in any way,
See "Don't
Overload
Generator".
Start generator
and let engine
stabilize
before
connecting
dectricai
loads.
Connect
electrical
loads in OFF position,
then turn ON for
operation.
Turn electrical
loads OFF and disconnect
from generator
before
stopping
generator.
Use generator
only for" intended uses.
If you have questions about intended use, ask dealer or call
1-888-61 1-6708.
Operate
generator
only on level surfaces.
DO NOT expose generator
to excessive moisture,
dust, dirt,
or" corrosive
vapors.
DO NOT insert any objects through cooling slots.
If connected
devices overheat, turn them off and disconnect
them from generaton
Shut off generator
ifi
-electrical
output
is lost;
-equipment
sparks, smokes, or" emits flames;
-unit vibrates
excessively.
Tabla de contenido
loading

Tabla de contenido