Idiomas disponibles
Idiomas disponibles
Table of Contents
Unpacking ............................................................ 15
Package Contents ................................................. 16
Preparing the Host Computer ............................ 16
Installing the S-AIT Library .............................. 17
Connecting the Power Cable .............................. 18
Connecting the SCSI Bus Cable ......................... 18
What's Next? ........................................................ 19
© 2005 Sony Corporation. All rights reserved.
Trademarks
• Sony, Advanced Intelligent Tape, and Super
Advanced Intelligent Tape are trademarks or
registered trademarks of Sony Corporation in this
country, other countries, or both.
• Other product names are trademarks or registered
trademarks of their respective owners in this country,
other countries, or both.
Unpacking
Caution
With a single drive installed, the S-AIT library weighs
approximately 27 kg/59.5 lbs.
At least two people are needed in order to handle the
library. Handling the S-AIT library on your own could
result in back injury or other accidents resulting in injury
or damage to the S-AIT library.
Note
You will need the box, packing materials and shipping
screws if you wish to move or transport the unit. Retain
them for future use.
1
Remove the unit from the box as indicated below.
Remove the packing materials, such as plastic
covers and tapes.
2
Inspect the unit for shipping damage.
If there is damage, do not use the unit. Report the
damage immediately by contacting your dealer.
3
Remove screws 1 and 2 (M4) on the left side, as
illustrated.
GB
15
Unpacking
