Idiomas disponibles
Idiomas disponibles
B
Water connection
We recommend fitting a filter to your water inlet supply in order to prevent damage to your
machine due to contamination (sand, rust, etc.) from indoor plumbing. This will also help
prevent yellowing and deposit formation after washing.
NOTE PRINTING ON THE WATER INLET HOSE!
If models are marked with 25°, the water temperature may
be max. 25 °C (cold water).
For all other models:
Cold water preferred; hot water max. temperature 60 °C.
Water inlet hose
WARNING
• Use the new water inlet hose supplied with your machine,
do not use an old machine's hose.
• Run water through the new hose before connecting.
• Connect the hose directly to the water inlet tap. The
pressure supplied by the tap should be a minimum of
0.03 MPa and a maximum of 1 MPa. If the pressure exceeds
1 MPa, a pressure relief valve must be fitted between the
connection.
Using the appliance
6
EN
