Idiomas disponibles
Idiomas disponibles
B
Fitting the machine undercounter
If you wish to fit your machine undercounter, there must be sufficient space to do so and the
wiring-plumbing must be suitable to do so
for fitting your machine, remove the worktop as shown in the illustration
WARNING
The countertop, which the machine will be placed under,
must be stable in order to prevent imbalance.
The top panel of the dishwasher must be removed to fit the
machine under the countertop.
To remove the top panel, remove the screws that hold it on,
located at the rear of the machine. Then, push the panel
1 cm from the front towards the rear and lift it. Adjust the
machine feet according to the slope of the floor
Fit your machine by pushing it under the counter taking
care not to crush or bend the hoses
WARNING
After removing the top panel of your dishwasher, the
machine should be placed in a space of the dimensions
shown in the figure below.
Using the appliance
. If the space under the countertop is suitable
1
.
4
9
EN
.
2
.
3
