Standard Accessories; Optional Accessory - Hitachi Koki WF 4H2 Instrucciones De Manejo

SPECIFICATIONS
Type of power
Air pressure (Gauge)
Capacity (Applicable screw)
Amount of loadable screws
Size
Weight
Screw-feeding method
Hose (inside diam.)

STANDARD ACCESSORIES

(1) Eye protector ................................................................ 1
(2) Oiler .............................................................................. 1
(3) Nose cap ...................................................................... 1
(4) Bit (No. 2 plus bit) ......................................................... 1
(5) Bit changing tool ........................................................... 1

OPTIONAL ACCESSORY

For details, consult with your sales outlet.
(1) Stability guide
The stability guide attaches to the bottom of the magazine
to suppress vibration to the body and to stabilize the tool
while driving screws.
(2) Screw coil
Screws come in a variety of shapes and sizes, as
indicated in Table 1; refer to Table 1 to select the screw
most appropriate for your application.
Table 1 Dimensions and shape of collated screws/Application chart
Application
Fastening gypsum board to steel studs
(Steel studs 0.8mm max thickness)
Fastening gypsum board to wood studs
Fastening plywood to wood studs
CAUTION
When selecting screws, always refer to Table 1.
application chart.
If an inappropriate screw is used, the driver will not
perform as designed.
Air motor revolution + Piston reciprocating
Collated screws: 25 – 41 mm
290 mm (L) × 300 mm (H) × 119 mm (W)
NOTE
○ When driving screws in steel studs, use the genuine
Hitachi steel stud screws in Table 1.
If any other screws are used, they may not drive properly.
○ Using them may cause improper driving (come out,
sticking up) or damage (strip the bit or head of the screw),
so do not use any screws but those specifi ed.
* Come out: Bit fails to engage with the head of the screw,
thus spinning out and failing to screw into the material.
Screw dimesions
Length L Dia. D Dia. d
(mm) (mm) (mm)
25
28 3.5
41
25 8.0
28
3.9
32
41
28
7.0 3.7
32
41
NOTE
The maximum thickness of a steel stud that can be used
with this driver is 0.8 mm.
If you try to drive into a thicker stud or in a place where
studs overlap, it may not drive into them.
(3) Bits
No. 2 Phillips bit (comes with 5)
18 – 23 bar
100 screws (1 coil)
2.1 kg
Piston reciprocation
5 – 6 mm
L
Gypsum board thickness (mm)
t9.5 + t9.5
t9.5 t12.5 t15
(double layer)
×
○ ○
○ ○ ○
× × ×
× ×
○
×
○ ○
×
○ ○
× × ×
English
t12.5 + t12.5
(double layer)
× ×
× ×
○ ○
× ×
× ×
×
○
○ ○
○: can be used
×
: cannot be used
9