DeWalt DW074LR Manual De Instrucciones página 18

ENGLISH
• To maintain the accuracy of your work, check the
calibration of the laser often. Refer to Calibrating the Laser.
• Calibration checks and other maintenance repairs can be
performed by D WALT service centers. Two free calibration
e
checks are included under the D
Service Con tract.
• When the laser is not in use, store it in the kit box provided.
• Do not store your laser in the kit box if the laser is wet. Dry
exterior parts with a soft, dry cloth and allow the laser to
air dry.
• Do not store your laser at temperatures below 0˚F (‑18˚C)
or above 105˚F (41˚C).

WARNING: Never use solvents or other harsh chemicals
for cleaning the non‑metallic parts of the tool. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the unit; never immerse any
part of the unit into a liquid. Never use compressed air to
clean the laser.
TROUBLESHOOTING
Height of Instrument Alert
The DW074LR and DW079LR/LG have a built‑in alarm feature
that alerts the operator if the unit is disturbed after the unit has
self‑leveled. The laser unit will stop rotating, the control panel
LED indicator light will flash, and the beeper will sound.
Turning the Laser Off
Press the the power button for 3 sec to turn the laser off. The
power LED indicator light will no longer be illuminated.
To Reset The Laser Unit for Continued Use
• Turn the unit off and back on again using the power button
on the laser unit control panel.
NOTE: Always recheck the laser setup after the Height of
Instrument Alert (hi mode / bump alert) has triggered.
Service and Repairs
NOTE: Disassembling the laser level will void all warranties on
the product.
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment should be performed by authorized service
centers. Service or maintenance performed by unqualified
personnel may result in a risk of injury. To locate your nearest
D WALT service center call 1–800–4‑D
e
9258) or visit our website: www.D
WALT One Year Free
e
WALT (1–800–433–
e
WALT.com.
e
Register Online
Thank you for your purchase. Register your product now for:
WARRANTY SERVICE: Registering your product will help
•
you obtain more efficient warranty service in case there is a
problem with your product.
CONFIRMATION OF OWNERSHIP: In case of an
•
insurance loss, such as fire, flood or theft, your registration
of ownership will serve as your proof of purchase.
FOR YOUR SAFETY: Registering your product will allow us
•
to contact you in the unlikely event a safety notification is
required under the Federal Consumer Safety Act.
Register online at www.dewalt.com/register.
Three Year Limited Warranty
D WALT will repair, without charge, any defects due to faulty
e
materials or workmanship for three years from the date of
purchase. This warranty does not cover part failure due to
normal wear or tool abuse. For further detail of warranty
coverage and warranty repair information, visit www.D
com or call 1–800–4‑D
warranty does not apply to accessories or damage caused
where repairs have been made or attempted by others. This
warranty gives you specific legal rights and you may have other
rights which vary in certain states or provinces.
In addition to the warranty, D
1 YEAR FREE SERVICE
D WALT will maintain the tool and replace worn parts
e
caused by normal use, for free, any time during the first year
after purchase.
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of your
D WALT Power Tool, Laser, or Nailer for any reason, you can
e
return it within 90 days from the date of purchase with a receipt
for a full refund – no questions asked.
RECONDITIONED PRODUCT: Reconditioned product is
covered under the 1 Year Free Service Warranty. The 90 Day
Money Back Guarantee and the Three Year Limited Warranty do
not apply to reconditioned product.
FREE WARNING LABEL REPLACEMENT: If your warning
labels become illegible or are missing, call 1–800–4‑D
visit your local service center for a free replacement.
18
WALT (1–800–433–9258). This
e
WALT tools are covered by our:
e
WALT.
e
WALT or
e