Idiomas disponibles
Idiomas disponibles
RRW 500 800 1000 1300 1500 1800
Room temperature recorded - Comfort temperature indicated = Value...
For example:
22ºC in a room temperature measured with the thermometer when the Comfort temperature required
on the thermostat (indicated) is 20ºC.
The temperature compensation value is 22 – 20 = +2ºC
The user must enter +2ºC on the temperature compensation menu.
Step 1 : Turn the thermostat to the Off position by pressing the button
Step 2: By pressing button M and holding for for 5 seconds, we will enter this menu where the display
shows 0.0
Step 3: Press buttons + or - to adjust fractions of 1ºC
Step 4: Press button M to confirm and return to the OFF position.
Step 5: Switch on the heater by pressing the button
Child lock :
The user can make sure that nobody changes the set programming, by locking the control panel. This
function is very useful for public buildings or for preventing children from tampering with the controls.
It is done by pressing the button
Open Window Detection:
This function makes it possible to detect an open window and automatically activate the anti-freeze
operating mode.
There are two different ways to activate it:
1. It is done by pressing the button
appears.
2. By pressing
If a temperature drop is observed in the room during the normal function, the anti-frost mode is
automatically activated to save energy consumption, and the symbol
If you press M, the heater will go back to normal function, the symbol
Cancelling this function is done by the same way.
on the remote control. To unlock it, press the same button again.
and M simultaneously for few seconds, till the symbol
button in the remote controller.
.
starts to flash continuously.
will be stop flashing.
44
