Contact Information; Regulatory Information - Aritech RF-DC101 Serie Manual De Instalación

statutory or otherwise including (but not limited to) any
warranties of merchantability or fitness for a particular purpose
with respect to the 433 products and related software. Carrier
does not warrant that the 433 products and software (i.) will not
be hacked, compromised and/or circumvented, or (ii.) will
prevent or provide adequate warning or protection from break-
ins, burglary, robbery, fire or (iii.) will work properly in all
environments and applications. Carrier shall not be liable
towards you or any third party for any damages whatsoever
(including, without limitation, those resulting from lost profits,
lost data or other loss of economic advantage) arising out of
the use, inability to use, or the results of use of or in any way
linked to the 433 Products and Software, whether based on
warranty, contract or tort. In no event shall Carrier be liable
towards you or any third party for any amount in excess of the
amount actually received by Carrier for the 433 Product and/or
Software.

Regulatory information

PLACED ON THE MARKET BY:
Manufacturer
Carrier Fire & Security Americas Corporation Inc.
13995 Pasteur Blvd
Palm Beach Gardens, FL 33418, USA
AUTHORIZED EU REPRESENTATIVE:
Carrier Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
Product warnings THESE PRODUCTS ARE INTENDED FOR SALE
and disclaimers TO AND INSTALLATION BY QUALIFIED
PROFESSIONALS. CARRIER FIRE &
SECURITY CANNOT PROVIDE ANY
ASSURANCE THAT ANY PERSON OR ENTITY
BUYING ITS PRODUCTS, INCLUDING ANY
"AUTHORIZED DEALER" OR "AUTHORIZED
RESELLER", IS PROPERLY TRAINED OR
EXPERIENCED TO CORRECTLY INSTALL FIRE
AND SECURITY RELATED PRODUCTS.
For more information on warranty disclaimers and
product safety information, please check
https://firesecurityproducts.com/policy/product-
warning/
Certification
INCERT C-001-1253
EN 50131 EN 50131-2-6: Security Grade 2, Environmental
Class II
Tested and Certified by Telefication
European Union Carrier Fire & Security hereby declares that this
directives device is in compliance with the applicable
requirements and provisions of all applicable rules
and regulations, including but not limited to the
Directive 2014/53/EU. For more information see:
www.firesecurityproducts.com
REACH Product may contain substances that are also
Candidate List substances in a concentration
above 0.1% w/w, per the most recently published
Candidate List found at ECHA Web site.
Safe use information can be found at
https://firesecurityproducts.com/en/content/intrusi
on-intro
4 / 28
or scan the QR code.
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European Union.
For proper recycling, return this product to your
local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated
collection points. For more information see:
recyclethis.info

Contact information

www.firesecurityproducts.com or www.aritech.com
For customer support, see www.firesecurityproducts.com
DE: Montageanleitung
WARNUNG: Wichtige Sicherheitshinweise. Lesen Sie die
beigefügten Warnungen und Sicherheitshinweise.
Beschreibung
In dieser Installationsanleitung wird die Installation des 433
MHz Tür-/Fenstersensors der RF-DC101-Serie beschrieben.
Die Serie umfasst die folgenden Funksensoren:
• RF-DC101-K4 (weiß)
•
RF-DC101B-K4 (mahagoni)
Sie können den Sensor auf Türen, Fenstern und sonstigen
Objekten anbringen, die sich öffnen und schließen lassen. Der
Sensor übermittelt Signale an die Einbruchmeldezentrale,
wenn ein in der Nähe des Sensors montierter Magnet vom
Sensor weg oder näher zum Sensor hin bewegt wird. Der
Sensor ist zusätzlich mit einem kombinierten Sabotagekontakt
für die Abreiß- und Öffnungsüberwachung ausgerüstet!
Abbildungen
Abbildung 1: Herausziehen des Batterie-Schutzstreifens
(1) Streifen herausziehen
Abbildung 2: Abnehmen der Sensorabdeckung
(1) Abdeckung
(2) Kleinen Schraubendreher in den Schlitz drücken und die
Abdeckung anheben
(3) Abdeckung für Schraubmontageloch
Abbildung 3: Einsetzen der Batterie
Abbildung 4: Eingangsauswahl-Steckbrücke
(1) Eingangsauswahl-Steckbrücke
Abbildung 5: Externer Kontakt Beschaltung
(1) Tür-/Fenstersensor
(2) Abschlusswiderstand
(3) Kontakte
Abbildung 6: Montagebohrungen
(T) Montageloch für T-Schraube
(T) Montageloch für L-Schraube
Abbildung 7: Sensor- und Magnetausrichtung
(1) Ausrichtungsmarkierungen
P/N 466-5226-EMEA-ML • REV E • ISS 09FEB21