Idiomas disponibles
Idiomas disponibles
Warning
• Only connect the product to a socket that has
been approved for the device. The socket must
be installed close to the product and easily
accessible.
• Disconnect the product from the network using
the power button – if this is not available,
unplug the power cord from the socket.
• When using a multi-socket power strip,
make sure that the sum power draw of all
the connected devices does not exceed its
maximum throughput rating.
• If you will not be using the product for a long
period of time, disconnect it from mains power.
Unless the operating instructions for the devices
you want to charge explicitly inform you otherwise,
proceed as follows:
• Connect your terminal device to a USB charging
socket using a suitable USB cable.
• Connect the charger to a properly installed and
easily accessible power socket.
• Charging progress is displayed on your terminal
device.
• Disconnect the terminal device from the charger if
you want to interrupt charging or if the terminal
device is fully charged.
• Then disconnect the charger from the mains.
When charging batteries built into a device, pay
attention to the maximum charging time for the
batteries.
5. Care and Maintenance
Only use dry, soft cloths for cleaning.
Note
Disconnect the device from the power supply
before cleaning or if it will not be used for a long
period of time.
6. Technical specifications
Specifications in accordance with
Regulation (EU) 2019/1782
Manufacturer's
name or trade
mark, commercial
registration number
and address
Model identi er
Input voltage
Input AC frequency
Output voltage /
Output current /
Output power
Average active
e ciency
E ciency at low load
(10 %)
No-load power
consumption
7. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no
warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to
observe the operating instructions and/or safety notes.
Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim
00200017
100-240 V
50/60 Hz
USB-C:
5.0V DC 3.0A 15.0W /
9.0V DC 3.0A 27.0W /
12.0V DC 3.0A 36.0W /
15.0V DC 3.0A 45.0W /
20.0V DC 3.0A 60.0W
PPS:
3.3V-11.0V DC 3.0A
9.9-33.0W
USB A1 + A2:
each port
5.0V DC 2.4A 12.0W
total 20.0W
USB-C + A1 + A2:
USB-C 45.0W
USB A1 + A2 20.0W
Total USB output:
max. 65.0W
86.0 %
77.3 %
0.30 W
3
