1
12.7 Cleaning the inlet hose and the valve filter
1.
1
2
3
3.
12.8 Frost precautions
If the appliance is installed in an area
where the temperature can be less than
7. Check carefully whether the pump impeller
rotates (it rotates jerkily). If it doesn't rotate,
please contact your Service Centre.
8. Put the cap back on the emergency
emptying hose and place the latter back in its
seat. Replace the filter into the pump by
2
inserting it correctly into the special guides.
Screw the filter cover firmly by turning it
clockwise.
2.
4.
20°
0° C, remove the remaining water from
the inlet hose and the drain pump.
1. Disconnect the mains plug from the
mains socket.
ENGLISH
21
45°