Switching On And Off; Data Hold Mode - Velleman DVM630 Manual Del Usuario

Display:
Indicates negative reading.
The meter is in data hold mode.
H
The battery is low.
battery as soon as the battery indicator appears.
Over range.
1
7. Use
7.1 Input Protection
Never exceed the limit value for protection.
Function Red lead connection
200 mV VΩmAhFE
V & V VΩmAhFE
mA VΩmAhFE
A 10A
VΩmAhFE
VΩmAhFE
VΩmAhFE

7.2 Switching On and Off

To switch the meter on, set the rotary switch [4] in the desired
measurement range position.
To switch the meter off, set the rotary switch to the OFF position.
Note: This device does not switch off automatically. To preserve the
battery, always set the rotary switch in the OFF position when the device is
not in use.

7.3 Data Hold Mode

The data hold mode locks the current readout on the display. Press the
HOLD key [2] to enter data hold mode. The display shows "H". Press the
HOLD key again to return to normal measuring mode.
V. 01 – 22/04/2013
DVM630
Warning: To avoid false readings, which can possibly
lead to electric shocks or personal injury, replace the
Input protection
220 VAC
600 VDC or VAC
fuse 200mA/600V (resettable)
fuse 10A/600V (fast)
measurement during max. 10 s
220 V rms (15 s)
250 VDC or 250 VAC rms
250 VDC or 250 VAC rms
9 ©Velleman Inc.