Lamborghini Caloreclima DORA 90 LT Manual De Uso, Instalación Y Mantenimiento página 105

DORA
90 LT - 120 LT
SAFETY WARNINGS
Read carefully before installing
ATTENTION and using the device.
The manual must be kept for future
reference until dismantling.
OBLIGATION
The manual is provided in paper format; how-
ever, it is available in digital version, which
can be downloaded from the website www.
lamborghinicalor.it by selecting the pur-
chased product.
Any intervention on the device,
including
performed by qualified person-
ATTENTION
nel with a suitable Refrigeration
Technician's Licence aimed at
the knowledge and management
of systems containing HC type
R290
gases such as R290 (Propane).
The unit can be used by children
aged 8 years and over and by
persons with reduced physical,
sensory or mental capacities, or
lacking in experience or the nec-
essary knowledge, provided they
ATTENTION
are supervised or have received
instructions regarding safe use
of the unit and understand the re-
lated hazards.
Children must not play with the
device.
Cleaning and maintenance op-
erations, which can be carried
out by the user, must not be per-
ATTENTION
formed by children without su-
pervision.
disposal, must be
cod. 3541T620 - Rev. 06 - 12/2022
Before carrying out any type of
intervention on the device, the
personnel in charge of mainte-
nance must refer to what is re-
ported in this manual in the fol-
lowing chapters and in particular
to consult chapter "8. REQUIRE-
MENTS FOR THE OPERATION,
ATTENTION
SERVICE AND INSTALLATION OF
APPLIANCES THAT USE FLAM-
MABLE REFRIGERANT GASES
ACCORDING TO ANNEX DD OF
EN 60335-2-40" on page 148.
During the design and construc-
tion phase of the systems, local
rules and regulations must be
ATTENTION
complied with.
The air inlet and outlet of the ap-
pliance must be channelled to
the external environment as in-
R290
dicated in paragraph 6.6 on page
135.
For equipment installation oper-
ations, refer to par. "6.4 PREPA-
RATION OF THE INSTALLATION
ATTENTION
SITE" on page 134 and par. "6.5
WALL FIXING" on page 135.
For the correct operation of the
device, the inlet water pressure
must be:
ATTENTION
- maximum 0.7 MPa (7 bar);
- minimum 0.15 MPa (1.5 bar).
EN
105