Idiomas disponibles
Idiomas disponibles
start again after 5 minutes.
Press the SNOOZE/LIGHT button at any other time to turn on the backlight for
5 seconds.
Temperature and humidity display
The clock measures and displays the indoor temperature and humidty.
Press the °C/°F button on the back of the clock to set °C or °F as temperature
unit.
Nightlight function
The brightness sensor in the clock activates the soft background lighting as
soon as it gets too dark to read the dial.
This function can be adjusted by moving the AUTO LIGHT switch on the back
of the product. Turn the AUTO LIGHT switch to the ON position, the nightlight
function is activated and will light up when the environment is too dark. Turn it
to the OFF position and the nightlight function will be deactivated.
Reset
If the clock shows an incorrect time or after changing the battery, press the
RESET button on the case back panel to re-start the alarm clock. The hands
(second, minute, hour) are adjusting again to 12 o'clock position and the clock
enters into signal reception mode. In successful signal reception the time will
be adjusted to the correct radio controlled time according to the DCF-77
reception signal.
Hereby, Technotrade declares that this product WT767 is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU and ROHS 2011/65/EC. The original EU declaration of conformity
may be found at: www.technoline.de/doc/4029665007670
EN4
