Denon AVR-X1200W Manual Del Usuario página 283

Ocultar thumbs Ver también para AVR-X1200W:
Setting Up
Front left and right speakers
The goal for these is to create a sound image wider than the screen that seems natural to viewers sitting anywhere in the room.
• Place these two front speakers on either side of your TV.
• Keep them 6 feet (2 m) to 15 feet (5 m) apart and at least 6 inches (15 cm) away from any CRT (picture tube) TV.
Center speaker
Sound from the center speaker should seem to come from within the picture to give the most realistic performance of on-screen action
and dialogue.
• Place the center speaker above, on top of, or below your TV. Do NOT rest the weight of the TV on the speaker.
• Keep the speaker in line with the vertical center of the screen, if possible, for the most accurate reproduction of dialogue.
• Keep the speaker at least 6 inches (15 cm) away from any CRT (picture tube) TV.
Rear speakers
While the rear (surround) speakers may deliver some dialogue, they serve primarily to deliver discrete sounds and special effects that
expand the visual image. They help bring the viewer into the center of the action.
Choose locations that are practical and convenient, while considering these recommended guidelines:
• Position the left and right rear speakers so they can deliver sound on both sides of the viewer, rather than from directly behind.
• Place these speakers at the same height as the ears of a seated viewer or higher.
Powered Acoustimass
module
®
Acoustimass speaker technology makes it difficult to locate the source of low-frequency sound from this module. So feel free to hide it
from view. Place the module according to the following guidelines:
• At the same end of the room as the TV screen.
• At least 2 feet (.6 m) from your TV set to prevent interference.
• To increase bass effects, turn the front opening toward a wall; turn it away from the wall to decrease bass effects.
• Keep both the front opening and the ventilation grille on the bottom of the module at least 2 inches (5 cm) from any other surface.
• Do not block the ventilation grilles located on the bottom of the module. Impeding ventilation can cause a reduction in the
bass-frequency output from the module.
Alternate
Preferred
6 - English
loading