Denon AVR-X1200W Manual Del Usuario página 222

Contents Connections
o No sound comes out
Symptom
No sound comes out of
0
speakers.
0
0
0
0
0
0
0
0
0
0
0
No sound comes out when
0
using the DVI-D
connection.
Front panel Display
Playback
Check the connections for all devices.
Insert connection cables all the way in.
Check that input connectors and output connectors are not reversely connected.
Check cables for damage.
Check that speaker cables are properly connected. Check that cable core wires come in contact with the
metal part on speaker terminals.
Securely tighten the speaker terminals. Check speaker terminals for looseness.
Check that a proper input source is selected.
Adjust the volume.
Cancel the mute mode.
Check the digital audio input connector setting.
Check the digital audio output setting on the connected device. On some devices, the digital audio output
is set to off by default.
When a headphone is plugged into the PHONES jack on the main unit, sound is not output from the
speaker terminal and SUBWOOFER connector.
When this unit is connected to a device equipped with a DVI-D connector, no sound is output. Make a
separate audio connection.
Rear panel
Settings
Cause / Solution
222
Remote
Tips Appendix
Page
Index
25
－
－
－
32
32
64
65
65
171
－
－
－