Idiomas disponibles
Idiomas disponibles
EN
CONFIGURATION PRESETS
The matrix has 6 PRESETs to store different configurations. Only 4 of them are accessible from the front of
the matrix. In order to make use of the available 6 you must make use of the GUI or RS-232.
- Make the desired input and output assignments and press the desired PRESET button for a few seconds.
- To load a previously stored configuration (PRESET), short press the PRESET you want to load.
Note: PRESETs do not save the EDID configuration.
REDUCTION OF VIDEO RESOLUTION (DOWN-SCALING)
This device automatically reduces the video resolution when the input signal is 4K and the display connected
to the output is 1080p. This function is available on outputs 5, 6, 7 and 8. The table below shows the different
types of 4K signals and the 1080p output resolution into which they are converted:
CONNECTION
- Make connections with all equipment turned off.
- Connect the HDMI signal sources to the corresponding INPUTS 1-8 on the matrix.
- Then connect the OUTPUTS 1-8 to the monitors/televisions.
You can use the digital/analog audio extraction function of the AUDIO OUTPUT 1-8 outputs (TOSLINK
digital connectors / RCA analog connectors) to connect the audio to an external sound system.
- Supply power to the matrix using the power adapter provided.
MATRIX REMOTE CONTROL
There are 3 different ways to remotely control the matrix:
- via TCP/IP communication - GUI.
- via RS-232 communication.
- vía CEC.
INPUT (4K)
3840x2160@60Hz 4:4:4
3840x2160@30Hz 4:4:4
3840x2160@24Hz 4:4:4
3840x2160@60Hz 4:2:0
3840x2160@30Hz 4:2:0
3840x2160@24Hz 4:2:0
3840x2160@60Hz 4:2:2
3840x2160@30Hz 4:2:2
3840x2160@24Hz 4:2:2
- 4 -
OUTPUT (1080p)
1080p@60Hz 4:4:4
1080p@30Hz 4:4:4
1080p@24Hz 4:4:4
1080p@60Hz 4:4:4
1080p@30Hz 4:4:4
1080p@24Hz 4:4:4
Not supported
