FONESTAR FO-22M88 Manual De Instrucciones página 8

EN
- RS232: allows you to configure the parameters of the RS232 connection to be connected to the matrix
and send the commands without external programs. The parameters to configure are:
- ASCII or HEX code.
- Baud rate: transfer speeds (2400, 4800, 9600, 19200, 38400, 57600, 115200).
- Command ending: command termination characters (NULL, CR, LF, CR+LF).
- Command: type here the command to control the device connected to the RS232 port of the matrix.
Note: by default the baud rate value must be 9600 and command ending NULL.
- INTERFACE: allows you to edit the names of the inputs and outputs of the matrix.
- NETWORK: allows you to edit the network parameters of the matrix as well as displaying the MAC address
of the network card of the matrix. It is possible to modify the following values:
- Type of IP address: Static IP or
DHCP (Dynamic Host Configuration
Protocol).
- IP Address.
- Subnet mask.
- Default gateway.
- 8 -