Idiomas disponibles
Idiomas disponibles
EN
COMMAND
@OUT[XX].
$OUT[XX].
GetGuiIP.
SetGuiIP:xxx.xxx.xxx.xxx.
Baudrate[X].
STA.
STA_POUT.
STA_IN.
STA_OUT.
STA_VIDEO.
STA_HDCP.
STA_AUDIO.
PresetSta[XX].
PresetRecall[XX].
Lock.
Unlock.
AUDIO[XX]:[YY].
AVOLUME[XX]:[YY].
HDCP[XX]ON.
HDCP[XX]OFF.
HDCP[XX]MAT.
HDCP[XX]PAS.
HDCP[XX]BYP.
EDIDMInit.
EDID/[XX]/[YY].
Activate/deactivate HDMI output [XX]
[XX]: 00 (all outputs from 1 to 8)
01-08 (output 1-8)
Matrix IP address
Modify IP address
Modify baud rate value for RS-232 connections
General status of the matrix (name, firmware, on/off, IP, inputs, outputs, etc.)
5 V status of the outputs
5 V status of the inputs
Status of the outputs (HPD), detects if devices are connected to the outputs
Input assignment for each HDMI output
HDCP status of the outputs
Assignment of the input for each of the analog audio outputs and their volume status
Save the current status of configuración to a preset [XX]
[XX]: 01-06 (preset number)
Download the saved preset configuración [XX]
[XX]: 01-06 (preset number)
Lock/unlock the buttons on the front panel of the matrix
Assign audio from an HDMI input/output [YY] to audio output [XX]
[XX]: 00 (all audio outputs from 1 to 8)
01-08 (audio output 1-8)
[YY]: 01-08 (HDMI input audio 1-8)
09-16 (HDMI output audio 1-8)
Modify analog audio output volume [XX]
[XX]: 00 (all audio outputs)
01-08 (audio output 1-8)
[YY]: V+ (increase volume)
V- (reduce volume)
MU (mute)
UM (unmute)
00-100 volume level
Enable/disable HDCP 1.4 to output [XX]
[XX]: 00 (all outputs from 1 a 8)
01-08 (HDMI output 1-8)
HDCP of the output [XX] is that of the connected
[XX]: 00 (all channels)
01-08 (channel 1 al 8)
HDCP of the output [XX] is that of the video signal
[XX]: 00 (all channels)
01-08 (channel 1 al 8)
HDCP output [XX] is always 1.4 except if the video signal does not have HDCP, in
that case the output will not have it either
[XX]: 00 (all channels)
01-08 (channel 1 al 8)
Restores EDID configuration to factory settings
Establish a preset EDID configuration [YY] in the input [XX]
[XX]: 00 (all HDMI outputs from 1 to 8)
01-08 (HDMI input 1-8)
[YY]: 01-08 preset EDID (see options in the EDID SETTING sub-section)
09 EDID defined by the user
FUNCTION
- 10 -
