Idiomas disponibles
Idiomas disponibles
EN
DESCRIPTION
- 8 x 8 HDMI MATRIX.
- 4K@60Hz UHD resolution, (4:4:4) and 18 Gbps bandwidth.
- HDR compatible.
- EDID function, manually selects optimal resolution for all TVs.
- Communication protocol through RS-232 port, IR and web browser for remote control.
CONTROLS AND FUNCTIONS
FRONT
1.- Matrix power indicator light. When the light is green, it indicates that the matrix is on; when the light is
red, it indicates that the matrix is in StandBy mode.
2.- IR receiver for remote control.
3.- INPUT 1-8: active input LEDs and input selection buttons.
4.- Buttons for configuration of inputs and outputs. For more information see the OPERATION section.
- ENTER: confirm operation.
- LOCK: Press and hold for 3 seconds to lock/unlock all buttons.
- ALL: allows you to select all inputs/outputs.
- CLEAR: allows you to cancel the operation that is currently being performed.
5.- PRESET RECALL 1-4: press to load preset. Press for 4 seconds to save preset. For more information
see the OPERATION section.
6.- OUTPUT 1-8: active output LEDs and output selection buttons.
REAR
1.- AUDIO MATRIX OUTPUT 1-8: digital and analog audio outputs, TOSLINK and RCA connector.
2.- IR EYE: input for connecting the supplied remote controller.
3.- RS232: connection for remote control of the matrix by RS-232 protocol. For more information see the
MATRIX REMOTE CONTROL section.
4.- INPUT 1-8: digital signal inputs in the matrix, HDMI connector.
5.- OUTPUT 1-8: digital signal outputs in the matrix, HDMI connector.
6.- FW: USB port to update firmware. Fonestar does not recommend tampering with this input.
7.- TCP/IP: port for remote connection of the matrix to a local area network, RJ-45 connector. For more
information see the MATRIX REMOTE CONTROL section.
8.- DC 24V: power connection for the power adapter provided.
- 2 -
