Idiomas disponibles
Idiomas disponibles
❖ PARTS IDENTIFICATION
1. Fan grill
2. Fan blades
3. Motor housing
4. Oscillation button
5. Speed dial
6. Fan/stand attachment bolt
❖ TO ASSEMBLE
−
Remove the base nut from the standing pipe. And then insert the standing pipe into the hole of
base, put the heavy base under the base. Fit the base nut back to the standing pipe and screw
it on firmly.
−
Remove the 4pcs screws form the motor pain.
−
Fit the rear fan grill onto the motor pain. Make sure that the 4 holes on the motor match the 4
holes on the rear fan grill. Fit the 4pcs screws and screw it on firmly.
−
Put the blade on the motor pain and carefully tighten the screw.
−
Fit the front fan grill onto the rear cage and fix them together using the metal clips. Tighten the
small screw.
−
Put the motor which installed the fan grill and blade on the top of the standing pipe, screw it
well.
CAUTION: Ensure the product is fully assembled before plugging it into an electrical outlet.
7. Angle-adjustment knob
8. Power cord and plug
9. Height lock
10. Standing pipe
11. Base
13
