Troubleshooting - cecotec bolero DRESSCODE 8400 INVERTER Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29
water in the pump. Never remove the pump cover during a wash cycle, always wait until the
appliance has finished the cycle and is empty.
When replacing the cover, ensure it is securely re-tightened.

6. TROUBLESHOOTING

Problem
The washing machine does
not start up
The door does not open
Water leakage
Detergent residues in the box
Indicator or display does not
light
Abnormal noise
Errors
Error
E30
Cause
The door is not closed
properly
The safety lock system is
activated
Bad connection between
pipes and water supply hose
or drainpipe.
Detergent is dampened or
agglomerated
The power PC board is
disconnected, or harness has
connection problem
Cause
Door is not closed properly
BOLERO DRESSCODE_8400 INVERTER / 9400 INVERTER / 10400 INVERTER
ENGLISH
Solution
Restart after the door is
closed.
Check if there are clothes
stuck.
Unplug it and restart the
product.
Check and fasten water pipes
and hose.
Clean up outlet hose.
Clean and wipe the detergent
box
Check if the power is shut
down and the power plug is
connected correctly.
Check if the fixing bolts have
been removed.
Make sure the appliance is
installed on a solid, level
floor.
Solution
Restart after the door is
closed.
Check if there are clothes
stuck.
55
Tabla de contenido
loading

Este manual también es adecuado para:

Bolero dresscode 9400 inverterBolero dresscode 10400 inverter

Tabla de contenido