Idiomas disponibles
Idiomas disponibles
EN
3.6.2.1. Readjustment of end limits set in manual mode
1] Place the driven product in its end limit position to be modified.
2] Press and hold the Up and Down buttons simultaneously for 5 seconds until
the motorised product moves up and down briefly.
3] Place the motorised product in its new end limit position using the Up or
Down buttons.
4] To validate the setting, press the my button until the motorised product
moves up and down briefly.
3.6.2.2. Readjustment of the automatic catching system at the lower end limit
1] Place the motorised product at its lower end limit.
2] Press and hold the Up and Down buttons simultaneously for 5 seconds: the
motorised product moves up and down briefly.
3] Press the Down button: the motorised product lowers.
4] Press the my button to stop the product at position (P1), which corresponds
to the automatic catching system's entrance point.
5] Press the my and Up buttons simultaneously: the motorised product raises
and stops, putting tension on the fabric.
6] Press the Down button: the motorised product lowers.
7] Press the my button to stop the motorised product at position (P2), which
corresponds to the automatic catching system's exit point.
8] To validate the setting, press the my button again until the motorised product
moves up and down briefly.
12
PERGOLA 50 io RGS
1]
2]
3]
4]
1]
2]
3]
4]
5]
6]
7]
8]
©
Copyright
2022 SOMFY ACTIVITES SA. All rights reserved.
PERGOLA 60 io RGS
5 s
5 s
