Idiomas disponibles
Idiomas disponibles
JA1010 Circle and Parallel Cutting
Guide (Sold separately)
The JA1010 is used for fast and accurate
straight and circle cutting. It includes the guide,
two clamps for attaching it to the jig saw, and
a center pin for guiding circle cuts. The clamps
and the centering pin can be stored on the guide
(Fig. 11).
One end of the clamp is used to attach the
guide's bar to jig saws that have narrow tops on
their footplate mounting slots A and the other
end is used to attach the guide's bar to jig saws
that have wide tops on their footplate mounting
slots B (Fig. 12).
When possible, attach the bar to the jig saw
using both clamps for enhanced grip and preci-
sion.
ATTACHING GUIDE TO JIG SAW
1. Orient the clamp so that the proper end is
placed on the jig saw foot from either side
of the tool.
2. Insert guide's bar through a clamp, then
through the slots provided in foot, with the
guide's fence orientated correctly for the in-
tended application, parallel cutting or circle
cutting. (If possible, place second clamp on
bar from opposite side of jig saw.)
3. Place lock knob(s) on proper side of
clamp(s) and securely tighten lock knob(s)
on the clamp(s) (Fig. 13).
160992A7EF_GST18V50_202203.indd 15
Operating Tips
Fig. 13
Clamp
-15-
Clamps
A
B
Lock
Guide
Knob
Fig. 11
Center
Pin
Fig. 12
3/25/22 11:47 AM
