Idiomas disponibles
Idiomas disponibles
UK
Troubleshooting
Possible anomalies
Star-Blender
TM
LB 400 does not start.
The door closes incorrectly.
Blending is not satisfactory.
Bags leak during or at the end of the
blending cycle.
General Maintenance
Cleaning
Switch in "0" position
fig.4
After maintenance
Ordering Information
Product
Star-Blender
TM
LB 400
Drip Tray
Bag holder for 10 bags
Automatic Straw pipette
Clips for Lab Blender bags
Sterile Straws for pipette : 1 ml, sterile by 25
Sterile Straws for pipette : 5 ml, sterile by 25
400 ml Lab Blender Bags : plain & sterile
400 ml Lab Blender Bags : lateral filter, sterile
400 ml Lab Blender Bags : full page filter, sterile
6
A
(fig.1)
B
Housing
• Clean the housing with standard
cleaning products.
• Open the door and unhook the
lower edge from the axis bar.
(fig.4)
B
When maintenance is finished, after checking that the unit is not damp, plug
in the power cord, and only then turn on the power switch.
Ask yourself
• Is the power cord connected?
• Is the power switch set on position "I" ? (fig.1)
• Is the mixer door correctly positioned and closed?
Do not force.
• Have you checked the fuse? (1,25A/220V 3,15A/110V)
Is the door properly centered on its lower axis bar? Do not force
Is the timer adjusted to the appropriate blending time?
Are you using good quality bags?
We recommend VWR bags.
Unplug the power cord from the power outlet.
• Clean the blending chamber and the
paddles with stainless steel cleaning
products.
• Reinstall the door, ensuring that it is
correctly centered.
Pack
1
1
1
1
200
1000
300
500
500
500
Blending chamber
Cat No.
710-0632
710-0633
710-0634
613-1058
129-9869
612-1675
612-1676
129-9867
129-9868
129-9875
