Steinberg Systems SBS-MT-100 Manual De Instrucciones página 16

3.2.
1. Install the batteries before using the device. Open the battery cover and insert 5
LR44 1.5V batteries.
2. Check the battery charge level periodically and replace it if necessary.
3. To start the device, press the switch. The device measures 4 groups of materials
described in the table below.
4. To make a measurement, use the measurement mode change button (M) to
select the group including the tested material (M1 - M4). The selected material
group will be shown on the display.
Group Material
designation
M 1 Abachi (African whitewood), abura, African mahogany, agba
(tola), andiroba, American ash, alder, aspen, red/black
alder, aiele, ash, Japanese ash, beech plank, basralocus,
birch, black afara, European beech, balsa, cedar, Mexican
cypress, campeachy, common beech, chestnut, dabema,
douka, Douglas fir, ebiara, ebony, emien, elm, guanandi,
silver hickory, hornbeam, poplar, iroko, izombe, Australian
eucalyptus, juniper, five-pin eucalyptus, variegated
eucalyptus, ipe, terminalia superba, campechian larch,
maple, mockernut hickory, niangon, niove, okoume, holm
oak, oak, piniora, patagonian cypress, pear, amaranth,
rosewood, red birch, southern linden pine, teak, Tree
Health, willow, walnut, yellow birch
M 2 Cherry, poplar aspen, mahogany, red cypress, parquet,
sessile oak, damson wood, elm, English oak, MDF, kosipo,
chipboard, larch,
pine, plum, common poplar, sandalwood, Swedish pine,
walnut, white beech, wood fibre, western red cedar, white
poplar, white birch, white maple
M 3 Afrormosia, cork tree, plasterboard, imbuia, kokrodua,
melamine board, niove bidinkala, ficus, phenolic resin
M 4 Concrete
Device use
African limba wood, maritime pine, paper,