Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING GUIDE
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
PROBLEM
If Stand Mixer warms up
during use:
If the Flat Beater hits the
bowl:
If Speed Control Lever does
not move smoothly or easily:
If your Stand Mixer should fail
to operate, please check the
following:
If the problem cannot be
corrected
:
W11555038A.indb 13
W11555038A.indb 13
WARNING
Electrical Shock Hazard
Under heavy loads with extended mixing time periods, you
may not be able to comfortably touch the top of the unit.
This is normal.
Stop the Stand Mixer. See the "Product Assembly" section
and adjust the beater to bowl clearance.
To move the Speed Control Lever with ease, lift up slightly
as you move it across the settings in either direction.
Is the Stand Mixer plugged in?
Is the fuse in the circuit to the Stand Mixer in working order?
If you have a Circuit Breaker Box, be sure the circuit is
closed.
Turn off the Stand Mixer for 10-15 seconds, then turn it back
on. If the Stand Mixer still does not start, allow it to cool for
30 minutes before turning it back on.
See the "Warranty and Service" section.
Do not return the Stand Mixer to the retailer; retailers do
not provide service.
SOLUTION
13
21-01-2022 10:48:32
21-01-2022 10:48:32
