Idiomas disponibles
Idiomas disponibles
9. Grab base near belt path and pull
side to side and front to back to
make sure base is installed tightly.
Base should not move more than 2.5
cm (1 in) side to side or front to back
at the belt path.
If base moves more than 2.5 cm
(1 in), open LockStrong arm, tighten
vehicle belt a little more, and try
again. If base still moves too much,
you may need to try a different
vehicle seat location, installation
method, or both.
68
Installing the Convenience Base to the Vehicle
Installing the Base with Lap Belt Only
