Changing The Harness Position On The Splitter Plate - Evenflo Shyft DualRide Manual Del Propietário

Changing the Harness Position on the Splitter Plate

WARNING!
!
ENSURE both harness straps are installed completely on the splitter plate.
Failure to properly attach the harness straps to the splitter plate may result in a
loose harness.
To change the harness strap position:
1. Remove the infant carrier from the
stroller frame and base.
2. Remove one side of the harness
strap from its current position on the
splitter plate and reattach in the new
position.
3. Repeat for other side.
4. Tighten harness straps by pulling
adjustment strap (pg. 43) front of
infant carrier.
120
Securing the Child
DEATH or SERIOUS INJURY can occur.